Square Glass Fabric 600 gr/m2
- Low resin absorption
- For panel stiffness
- Very good wetting
Square glass fabric 600 gr/m2 is a high quality heavy fabric which is often used for building boats, surfboards, longboards, skis and much more. The fabric consists of 2 layers of unidirectional fibres, 1 layer in the length of the roll and 1 layer in the width of the roll. This gives the fibre an optimal compressive and tensile strength.
The advantage of this square glass fabric is that it allows for a light, yet very stiff construction. Because the fibres lie close together, resin absorption is minimised, which contributes to the efficiency and strength of the laminate. Square glass fabric offers a high flexural strength and results in a thickness of 0.78 mm after lamination. The fabric is easy to laminate in combination with epoxy, polyester and vinylester,w ith a resin absorption of approximately 495 grams per square metre.
Product properties
| Application method | Layer thickness | Resin consumption |
| Hand lamination | 0.78 mm | approx. 549 gr/m2 |
| Wet Bagging | 0.55 mm | approx. 312 gr/m2 |
| Vacuum injection | 0.52 mm | approx. 288 gr/m2 |
Weight: 600 gr/m2
Weave type: square 0/90
Width: 127 cm
Suitable for: polyester resin, vinylester resin and epoxy resin
Packaging:
- 1 lm: 127 cm x 1 lm (1.27 m2)
- 5 lm: 127 cm x 5 lm (6.35 m2)
- 20 lm: 127 cm x 20 lm (25.4 m2)
- 127 cm x 50 lm (63.5 m2), roll-packed
Delivery:
- 1 m2, 5m2 and 20 m2 roll-packed in a box
- 50 metres roll-packed in foil
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
