- Complete resin infusion test kit
- Includes resin and auxiliaries
- Everything you need!
With the resin infusion starter kit you immediately have the necessary materials at home to start your resin infusion project. To start with resin infusion, we have put together a complete package with all the necessary materials, such as Hexion infusion resin, vacuum film, peelply, infusion mesh and other auxiliary materials. This complete set is ideal for trying out the resin infusion technique. The only thing you need to add is a vacuum pump and your desired laminate.
What is resin infusion?
With resin infusion, a FRP construction is built in or on a mould. After laying up the fibre stack, the complete package is sealed all around by means of vacuum film. After the vacuum film is connected airtight to the mould, a vacuum is pulled. The vacuum draws the resin evenly through the fibre pack. In the video below, product specialist Herman shows you how to work with resin infusion!
Contents of the resin infusion starter kit
|Hexion resin infusion epoxy resin (fast variant)
|Infusion mesh (Stevik)
|Mixing cups (2240 ml)
To successfully start a vacuum injection project there are 2 things that are needed that are not included:
- Vacuum pump
- Desired laminate stack
Of course we can assist in that.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.