Araldite 2010-1 Epoxy Adhesive


- 2-component epoxy adhesive
- Very strong bonding
- For metals, wood and plastic
Araldite 2010-1 is a 2-component toughened and fast curing epoxy adhesive. The multifuncitonal thixothrope adhesive cures at room temperature and is suitable for bonding a wide variety of metals, ceramic materials, glass, rubber and hard plastics and similar materials.
Features Araldite 2010-1
- Good resistance to chemicals, heat and water.
- Low shrinkage.
- Highly impact resistant.
Applications
Araldite 2010-1 is suitable for bonding a wide variety of materials:
- Various metals.
- Ceramic materials.
- Glass.
- Hard plastics.
- Rubber.
Technical properties
Packaging: 200 ml cartridge
Mixing tube: mixing tube D (200 ml)
Application gun: handgun LS200 (200 ml)
Colour: light yellow
Specific gravity: 1.16 g/cm3
Shear strength: 22 N/mm2
Peel strength: 6 N/mm
Viscosity: 80.000 mPa.s
Temperature resistance: -60°C to +100°C
Open time: 10 - 30 minutes
Minimum hardening time for initial strength: 4 hours for 1 N/mm2 on aluminum at 23°C
In combination with the right application gun and suitable mixing tubes you can use Araldite 2010-1 instantly!
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
Safety equipment
Gevaar
Code | Description |
---|---|
H314 | Causes severe skin burns and eye damage. |
H315 | Causes skin irritation. |
H317 | May cause an allergic skin reaction. |
H319 | Causes serious eye irritation. |
H411 | Toxic to aquatic life with long lasting effects. |
P273 | Avoid release to the environment. |
P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
P312 | Call a POISON CENTER/doctor/… if you feel unwell. |
P301+P310 | IF SWALLOWED: Immediately call a POISON CENTER/doctor/… |
P301+P330+P331 | IF SWALLOWED: rinse mouth. Do NOT induce vomiting. |
P303+P361+P353 | IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. |
P304+P340 | IF INHALED: Remove person to fresh air and keep comfortable for breathing. |
P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
P405 | Store locked up. |
P501B | Dispose of contents / container in accordance with local, regional or international regulations |
EUH205 | Contains epoxy constituents. May produce an allergic reaction. |